Try drilling the holes first. Then all you have to do is connect the dots if you are using a Dalo Pen. It's also easier to line up any artwork.
Make soldering as easy as possible and allow easy access to the pins to be soldered by:
Panels@ Cases@ Mounts@ Enclosures@ Cables@
CAM@ CNC@ Mills@ Laser Cutters Position Sensors@
|file: /Techref/building.htm, 3KB, , updated: 2017/9/21 18:59, local time: 2019/8/20 00:12,
|©2019 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/building.htm"> Low Volumn Production</A>
|Did you find what you needed?|
Welcome to sxlist.com!
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!