please dont rip this site

Computer Numerical Control Applications

CNC applications provide a user interface for the control of a Mill, Lathe or other machine. They typically do motion planning and send control signals directly to a stepper or other motor driver. Because standard operating systems are NOT design for real time control, it can be best to use a seperate embedded motion controller and simply relay G-CODE or other commands from the main system.

http://www.machsupport.com/ Home of Mach3, popular CNC app for Windows platforms. Windows is not generally designed for real time control, but a clean / special install can work with the PC parallel port to send Step and Direction signals to motor drivers via a break out board like the BOB.

http://www.linuxcnc.org/ Home of EMC2, popular CNC app for Linux (Ubuntu) platforms. Open Source. Uses the PC parallel port to send Step and Direction signals to motor drivers via a break out board like the BOB.

http://www.dakeng.com/turbo.html Turbo CNC. One of the better CNC apps runs from win/dos command line. Performs well on old/used PC's which keeps your nice laptop safe from electrical problems! Uses the PC parallel port to send Step and Direction signals to motor drivers via a break out board like the BOB.

http://www.kellyware.com Home of KCAM. Simple Windows based app.

See embedded motion controllers for non-PC based systems.

Also:

+

Code:

See also:


file: /Techref/app/cncs.htm, 6KB, , updated: 2016/4/4 12:12, local time: 2024/10/8 12:11, owner: JMN-EFP-786,
TOP NEW HELP FIND: 
35.170.81.33:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.sxlist.com/techref/app/cncs.htm"> Computer Numerical Control Applications</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to www.sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .