Using a shift register to get 7 or 8 output pins from 1 PIC pin
If you would like to use In Circuit Serial Programming with a PIC uC on the Shift-1, this little cable/adapter will help. (Thanks to Joe Watson)
The Shift 1 is designed to directly connect to a standard 1x15 LCD panel. If you want to use it with the LCD Panel 1, you can wire them together
|file: /Techref/io/lcd/Shift1.htm, 1KB, , updated: 2013/5/6 18:34, local time: 2017/12/11 05:05,
|©2017 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/io/lcd/Shift1.htm"> Roman Black's Shift-1 wire serial LCD driver and project board</A>
|Did you find what you needed?|
LCD Front Panel Set: $8.99!
- 2x16 LCD HD44780 controller
- 4 push buttons - 3 LEDs - 2x12 header
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!