the MassMind
...content heavy,
light sales...
NOTICE: This store is closing
Kits | Books | Gadgets | Cables | Services | Stepper Drivers
Products > Stepper Drivers > 4Axis5_c11M:Cable for 1 driver (1/AXIS) PMinMO STD

Use this cable to connect a single axis stepper controller with a PMinMO compatible connector^ (Linistepper, SLAm, etc...) to its break out board.

Note: When used with our 4Axis board, only two non-adjacent axis can be connected with this cable. E.g. X and Z or Y and A. This limitation is due to the spacing of the axis headers on the 4Axis board; which was required to support the use of a single 2x20 IDC cable which fans out to 4 separate 2x10 PMinMO drivers. If you need more than 2 axis, use the 4Axis cable instead.

length: 5 inches.
conductors: 10.
connector1: 2x5 female IDC.
connector2: 2x5 female IDC.
wire size: Ribbon.
level: easy.
4Axis5_c11M:Cable for 1 driver (1/AXIS) PMinMO STD $3.00 1 in stock

You may also be interested in:
416079 PID Servo Controller
416012 break out board
416014 connect up to 4 axis with one cable

user @44.222.134.250, your shopping cart is empty.

James Newton's MassMind.org offers Kits, Books, Gadgets, Cables, Services, and these Stepper Drivers:

Picture of item #4160124Axis5:
BOB/Pulse/Power(PC Board ONLY)
:
 $8.00  in stock
4Axis5_pc:DB25 conn & cable for PC parallel port $9.95 2 in stock
4Axis5_pulse: Pulse generator parts ONLY $4.95 3 in stock
4Axis5_pwr:5V regulator parts $2.00 2 in stock
4Axis5_RLY:Relay driver (parts only!) $3.95 5 in stock
6064A: Adapter cable Pololu $4.95 6 in stock
6064P: Stepper Motor Driver (PCB/SMT ONLY!) $10.95 42 in stock
RULMS3_PIC: Linistepper programmed uC (Chip ONLY!) $5.95 Backordered!   Expected in 1 weeks