PC (Program Counter) The PC register (address 02h) contains the lower eight bits of the 11-bit or 12-bit program counter. The program counter is a pointer register that points to the current instruction being executed in the 2,048-word or 4,096-word program memory. During regular program execution, the program counter is incremented automatically once per instruction cycle. This regular sequence is altered in order to perform skips, jumps, and subroutine calls in the application program.
See also:
SX Microcontroller Conditionals / Program flow +
| file: /Techref/scenix/reg/pc.htm, 0KB, , updated: 2004/6/10 14:40, local time: 2010/7/30 21:48,
38.107.191.81:LOG IN
|
| ©2010 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://www.sxlist.com/techref/scenix/reg/pc.htm"> SX Microcontroller Program Counter</A> |
| Did you find what you needed? |
Watch, recieve and send I2C via serial port. 100Kb/s. Also 5 TTL out & 8 in. $15 chip $30 w/ PCB $40 kit $50 A&T sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
|
The Backwoods Guide to Computer Lingo |
.