;By Dr. Imre Bartfai ; What you need is to define the polynomial. E. g. for the CCITT one: poly0 equ $21 poly1 equ $10 ; Do not forget to initialize <crcval> = <crch:crcl> before the 1st call ; e. g. with 0xFF or with zeroes, as the particular CRC algorithm ; requires. ;This subroutine calculates a 16-bit CRC ;-------- ; CrcUpd: update <crcval> using <W> ; ; crch DS 1 crcl DS 1 saved DS 1 oldcch DS 1 i DS 1 CrcUpd mov saved, W ; j = W mov W, #8 ; W = 8 mov i, W ; i = W _loop mov W, crch mov oldcch, W ; temporary save clrb C ; clear carry for rlf rl crcl ; crc << 1 rl crch mov W, saved ; the char read xor oldcch, W ; test with old high sb oldcch.7 ; if bit set, apply mask jmp _notset ; otherwise skip mov W, #poly0 xor crcl, W mov W, #poly1 xor crch, W _notset clrb C ; for rl rl saved ; next bit of saved decsz i jmp _loop ret ; ; End CrcUpd
|file: /Techref/scenix/lib/io/osi2/crc_sx.htm, 1KB, , updated: 2001/5/19 19:49, local time: 2020/1/25 17:49,
|©2020 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/scenix/lib/io/osi2/crc_sx.htm"> SX Specific Cyclic Redundancy Check 16 and 32 Bit </A>
|Did you find what you needed?|
Welcome to sxlist.com!
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!