PopW (DW $04C)
|Description:||Pop the contents of W from the "WStack"|
|Operation:||W = WStack[WSP--]|
|Details:||Secret Instructions Page|
|Microchip PIC syntax:||n/a|
The WStack is only two levels deep and is used by both the interrupt and the debug system. If you don't set a breakpoint or happen to break into debug while in an ISR, you can use one level without concern. If you don't use interrupts or debug, you can use both levels.
To use this instruction, first define the following macro.
PopW macro DW $04C endm
|file: /Techref/scenix/inst/popw.htm, 1KB, , updated: 2004/12/13 16:57, local time: 2019/12/14 23:08,
|©2019 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/scenix/inst/popw.htm"> SX Instruction PopW</A>
|Did you find what you needed?|
Welcome to sxlist.com!
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!