please dont rip this site

SX Microcontroler Assembly language Macros

when using the SXKey internal assembler (rather than SASM) if you define a macro and pass it an argument of e.g. $-2, the $ is relative to the start of the macro and in SASM it is relative to the start of the instruction. I believe this is because SASM doesn't evaluate macro parameters until they are used and the SXKey asm evaluates them before the macro is called.

How about setting up a macro that compiles a subroutine inline (with a jump around it) the first time it is used and then sets an equate that causes only the call to the subroutine to be compiled on following calls? See: the massmind NewsLetter:  Issue 0403 for just that AND a great introductions to programming with macros.

Program Templates / Macros

Michael Chadwick [mrchadwickusa(no spam) at yahoo,com] says:

I use the ?(expression) feature of SASM macro processing to display things like how much more room I have left in the first halfof a page.
;-------------------------------------------------------------------------------
; General purpose macros to allow warnings if a page boundary is exceeded
; and to allow the display of variables and calculations at assembly time.
;-------------------------------------------------------------------------------
; Only two are used directly, the others support the evaluation of the 
; variables and expressions.
;===============================================================================
; Requires the use of SASM or it won't work.
;*******************************************************************************
; Use as follows:
; org ISR_BANK
; ..........................
; code etc goes here, the ISR, subroutines etc.
; ..........................
; at the end of the code that must be in the lower half of the bank
; do this:
; checksub ISR_BANK
; it will generate an assembler user warning that the subroutines went past
; the first half of the page by how ever many bytes they did, displayed in hex
;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
;-------------------------------------------------------------------------------
; may be used with {Text to be displayed goes in here} to generate a warning
; from a text string
warning  MACRO text
  ERROR P1W ?text
  ENDM
;-------------------------------------------------------------------------------
; Basic text display macro that allows multiple arguments.  This is handy
; because SASM macros allow evaluation of an argument as an expression
; by enclosing the expression thus: ?(expression) on the macro invocation
; line.  So we can calculate things and display them as appropriate.
distext  MACRO
  if(\0>=10D)
  warning {\1??\2??\3??\4??\5??\6??\7??\8??\9??\10}
  endif
  if(\0=9)
  warning {\1??\2??\3??\4??\5??\6??\7??\8??\9}
  endif
  if(\0=8)
  warning {\1??\2??\3??\4??\5??\6??\7??\8}
  endif
  if(\0=7)
  warning {\1??\2??\3??\4??\5??\6??\7}
  endif
  if(\0=6)
  warning {\1??\2??\3??\4??\5??\6}
  endif
  if(\0=5)
  warning {\1??\2??\3??\4??\5}
  endif
  if(\0=4)
  warning {\1??\2??\3??\4}
  endif
  if(\0=3)
  warning {\1??\2??\3}
  endif
  if(\0=2)
  warning {\1??\2}
  endif
  if(\0=1)
  warning {\1}
  endif
  ENDM
;-------------------------------------------------------------------------------
;example use of distext to display mixed text and values.
;distext {Current Program Version:SPEM }, ?VERSION_MAJOR, {.}, ?VERSION_MINOR, {.}, ?REVISION, {.}, ?PLATFORM
;-------------------------------------------------------------------------------

;-------------------------------------------------------------------------------
; only used to display the Subroutine warning message with variables
; substituted into the message for the specific program bank
difference MACRO pagestart offset
  warning {pagestart??: Subroutines over by 0x??offset??.}
  ENDM
;-------------------------------------------------------------------------------
; checks if loc is past pagestart + $ff and issues warning if it is
pagetest MACRO loc, pagestart
  IF($??loc > pagestart+$100)
;  make error because the page went too long for subroutines!
  distext {pagestart??: Subroutines over by 0x}, ?($??loc-pagestart-$100), {.}
;  difference pagestart, ?($??loc-pagestart-$100)
  else
  distext pagestart, {is OK.}
  ENDIF
  ENDM
;-------------------------------------------------------------------------------
; Simplifies the use of the rest to give a nicely formated and informative
; warning message to indicate we are past the first half of a page and
; by how much so we can work out how to trim things back
checksub MACRO startofpage
  RADIX HEX
  pagetest ?($), startofpage
  RADIX D
  ENDM
;-------------------------------------------------------------------------------
; Sample macro usage that displays the amount of space left in the first half
; of the current page if any and displays how much over if over.
checkpage MACRO
  RADIX H
  distext {CHECKPAGE: program counter is 0x}, ?($), {.}
  if($&$1ff < $ff)
   distext 0x,?($100-($&$ff)),{ Bytes left in the first half of the page.}
  else
   distext 0x,?(($&$1ff)-$ff),{ Bytes beyond the first half of the page.}
  endif
  RADIX D
  ENDM

I use the following to tell me how far off my ISR frequency is from what I want:

osc equ 50_000_000  ; assume 50 MHz oscillator
ISR_freq equ 614_400  ; 1.627uS
; protocol related constants
; the initial times 10 and subsequent +5 s are
; to force rounding to take place at the proper points
; the final divide by 10 removes the initial factor of 10
; proper ISR rate to produce accurate baud rates is 307200, or 614400.
; actual ISR rate with a 50 Mhz crystal is osc/ISR_count
; percent error is (ISR_real-ISR_freq)*100)/ISR_freq
ISR_count equ ((osc*10/ISR_freq)+5)/10
ISR_real equ osc/ISR_count
; calculate the error to .1% resolution
IF (ISR_real) > ISR_freq)
; Real frequency is too high
ISR_Error equ ((ISR_real-ISR_freq)*1000)/ISR_freq
distext {ISR Frequency is:}, ?(ISR_real), { Hz, high by},{ .}, ?(ISR_Error), {%}
ELSE
; Real frequency is too low
ISR_Error equ ((ISR_freq-ISR_real)*1000)/ISR_freq
distext {ISR Frequency is:}, ?(ISR_real), { Hz, low by},{ .}, ?(ISR_Error), {%}
ENDIF

Of course, if the error gets bigger than .9% the message isn't quite right, but could be fixed with some more IF ELSE constructs. Or maybe I need a macro to generate text from a number with an arbitrary fixed decimal place......

Comments:


file: /Techref/scenix/inst/macro.htm, 7KB, , updated: 2006/1/18 14:28, local time: 2024/11/3 07:49,
TOP NEW HELP FIND: 
44.192.67.10:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.sxlist.com/techref/scenix/inst/macro.htm"> SX Microcontroler Assembly language Macros</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to www.sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .