OWWRBIT |
Syntax: OWWRBIT Pin, BitVal
Function
Writes one bit to a 1-Wire bus.
Quick Facts
All SX Models | |
Special Notes | The DQ pin (specified by Pin) must have a 4.7 kΩ pull-up resister. |
1-Wire commands require a FREQ setting of 4 MHz or higher. |
Explanation
After reset, 1-Wire transactions require writing values to the bus. While this
is typically handled with OWWRBYTE, SX/B supports bit access with the
OWWRBIT instruction. A bit is written by generating a timed low pulse
on the DQ line; this is called a "Write Slot." The diagrams and tables below
details the Write Slot sequences generated by the SX with OWWRBIT.
WRITE 0
Note | Timing | Description |
A | 60 µS | Write Slot 0 (SX master) |
B | ~ 10 µS | Write Slot recovery |
WRITE 1
Note | Timing | Description |
A | 5 µS | Write Slot 1 (SX master) |
B | ~ 65 µS | Write Slot recovery |
Related instructions: OWRESET, OWRDBIT, OWRDBYTE, and OWWRBYTE
file: /Techref/parallax/sxb/sxb/owwrbit.htm, 3KB, , updated: 2006/4/10 14:47, local time: 2024/5/18 23:34,
3.135.62.42:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.sxlist.com/techref/parallax/sxb/sxb/owwrbit.htm"> OWWRBIT</A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to www.sxlist.com! |
.