Displays or sets the date. DATE [date] Type DATE without parameters to display the current date setting and a prompt for a new one. Press ENTER to keep the same date. If Command Extensions are enabled the DATE command supports the /T switch which tells the command to just output the current date, without prompting for a new date.
|file: /Techref/os/win/winnt/slide19.htm, 1KB, , updated: 2004/5/26 14:30, local time: 2023/12/5 07:32,
|©2023 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/os/win/winnt/slide19.htm"> Help for all NT Version 4.0 commands</A>
|Did you find what you needed?|
Welcome to sxlist.com!
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!