please dont rip this site Prev Next

GetPrivateProfileSectionNames info  Overview  Group

The GetPrivateProfileSectionNames function retrieves the names of all sections in an initialization file. This function is provided for compatibility with 16-bit Windows-based applications. Win32-based applications should store initialization information in the registry.

DWORD GetPrivateProfileSectionNames(

    LPTSTR lpszReturnBuffer,

// address of return buffer

    DWORD nSize,

// size of return buffer

    LPCTSTR lpFileName

// address of initialization filename

   );

Parameters

lpszReturnBuffer
Points to a buffer that receives the section names associated with the named file. The buffer is filled with one or more null-terminated strings; the last string is followed by a second null character.
nSize
Specifies the size, in characters, of the buffer pointed to by the lpszReturnBuffer parameter.
lpFileName
Points to a null-terminated string that names the initialization file. If this parameter is NULL, the function searches the WIN.INI file. If this parameter does not contain a full path to the file, Windows searches for the file in the Windows directory.

Return Values

The return value specifies the number of characters copied to the specified buffer, not including the terminating null character. If the buffer is not large enough to contain all the section names associated with the specified initialization file, the return value is equal to the length specified by nSize minus two.

Remarks

This operation is atomic; no updates to the initialization file are allowed while the section names are being copied to the buffer.

Calls to profile functions might be mapped to the registry instead of to the initialization files. When the operation has been mapped, the GetPrivateProfileSectionNames function retrieves information from the registry, not from the initialization file; the change in the storage location has no effect on the function’s behavior.

The Win32 Profile functions (Get/WriteProfile*, Get/WritePrivateProfile*) use the following steps to locate initialization information:

  1. Look in the registry for the name of the initialization file, say myfile.ini, under IniFileMapping:

    HKEY_LOCAL_MACHINE\Software\Microsoft\
            Windows NT\CurrentVersion\IniFileMapping\myfile.ini

  2. Look for the section name specified by lpAppName. This will be a named value under myfile.ini, or a subkey of myfile.ini, or will not exist.

  3. If the section name specified by lpAppName is a named value under myfile.ini, then that value specifies where in the registry you will find the keys for the section.

  4. If the section name specified by lpAppName is a subkey of myfile.ini, then named values under that subkey specify where in the registry you will find the keys for the section. If the key you are looking for does not exist as a named value, then there will be an unnamed value (shown as "<No Name>") that specifies the default location in the registry where you will find the key.

  5. If the section name specified by lpAppName does not exist as a named value or as a subkey under myfile.ini, then there will be an unnamed value (shown as "<No Name>") under myfile.ini that specifies the default location in the registry where you will find the keys for the section.

  6. If there is no subkey for myfile.ini, or if there is no entry for the section name, then look for the actual myfile.ini on the disk and read its contents.

    When looking at values in the registry that specify other registry locations, there are several prefixes that change the behavior of the ini file mapping:

    ! - this character forces all writes to go both to the registry and to the .INI file on disk.

    # - this character causes the registry value to be set to the value in the Windows 3.1 .INI file when a new user logs in for the first time after setup.

    @ - this character prevents any reads from going to the .INI file on disk if the requested data is not found in the registry.

    USR: - this prefix stands for HKEY_CURRENT_USER, and the text after the prefix is relative to that key.

    SYS: - this prefix stands for HKEY_LOCAL_MACHINE\SOFTWARE, and the text after the prefix is relative to that key.

See Also

GetPrivateProfileSection, WritePrivateProfileSection


file: /Techref/os/win/api/win32/func/src/f37_1.htm, 6KB, , updated: 2000/4/7 12:19, local time: 2024/3/28 02:02,
TOP NEW HELP FIND: 
54.210.126.232:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.sxlist.com/techref/os/win/api/win32/func/src/f37_1.htm"> GetPrivateProfileSectionNames</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to www.sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .