please dont rip this site

Seperating the Vcc and Gnd for the A/D converter

Andy Kunz says:

[We should separately bypass/isolate the AVcc and AGND]

It came about as a result of using a 17C756 (in which they are labelled as AVcc/AGND) while having poor results with a '74. One day, a lightbulb went off, and all of a sudden it worked with the new power layout. Ever since then I've used a fixed part (separated the two power/ground systems) in the schematic package and have not had such problems any more.

I think it's an oversight on their part NOT to tell us this. What I can't figure is how they get a '73/76 to work well, since it's the same die as the 40-pin part just a different bonding.

I never thought of it until just now, but I wonder how much resistance is between the two grounds and two power supply pins.

Dan Michaels says:

This is most unfortunate. Exactly the other side of the "AGnd" are the oscillator pins, so this gnd pin makes a really great place to return the little gnd-trace-island that you draw around the xtal/cap/cap area on your pcb to help isolate and confine the hi-freq stuff.

So, instead of reducing overall noise, you end up directing it straight into your AGnd. Gakkk. Wrost of all possible worlds.


file: /Techref/microchip/a2dvccgnd.htm, 1KB, , updated: 2004/2/13 15:40, local time: 2024/7/23 04:11,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> Seperating the Vcc and Gnd for the A/D converter</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?


Welcome to!

Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.

Welcome to!