please dont rip this site

Language Pcl LJ2077.ASC


     The Absolute character Size ( SI ) command, specifies
     the size of labeling characters in centimeters.  For
     more information see the Updated PCL 5 Printer Language
     Technical Reference Manual. The syntax for this command
     is as follows:
     SI width, height; or SI;
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     EcE                           Resets the printer.
     Ec%0B                         Enters HP-GL/2 mode.
     IN;                           Initializes HP-GL/2 mode.
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     PA700,3000;                   Enters absolute plotting
                                   mode and moves to
     DT#;                          Defines the label
                                   terminator as the "#"
     LBPrint#;                     Prints the word "Print"
                                   in the default font.
     PA700,2000;SI1,1.5;LBPrint#;  Moves to (700,2000);
                                   specifies an absolute
                                   character size of 1 cm
                                   wide by 1.5 cm high;
                                   prints the word "Print".
     SI;                           Send SI with no
                                   parameters to return to
                                   the default size.
     4148;SS;                      Designates a 12 point
                                   Universe font and selects
     PA 4000,3000;LBPrint#;        Moves to (4000,3000) and
                                   prints the word "Print"
                                   in the 12 point Universe
     PA4000,2000;SI1,1.5;LBPrint#; Moves the pen to
                                   (4000,2000) and specifies
                                   a character size of 1 cm
                                   by 1.5 cm; prints the
                                   word "Print".
     Ec%0A                         Enters PCL mode.
     EcE                           Sends a reset to end the
                                   job and eject the page.

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

file: /Techref/language/pcl/lj2077.asc, 3KB, , updated: 1993/11/15 17:25, local time: 2024/6/12 12:40,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> language pcl lj2077</A>

Did you find what you needed?


Welcome to!

Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.

Welcome to!