please dont rip this site

Language Pcl LJ2051.ASC


     The Select Secondary Font command ( FN ), allows any
     accessible font that has been assigned a font ID number
     to be selected as the secondary (alternate) font. For
     more information see the PCL 5 Printer Language
     Technical Reference Manual. The syntax for this command
     is as follows:
     FN font-ID;
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     EcE                           Resets the printer.
     Ec*c28D                       Specifies a font ID
                                   number of 28.
     Ec(s1p18v0s3b4148T            Selects an 18-point
                                   Universe Bold font as the
                                   primary font.
     Ec*c6F                        Assigns the currently
                                   selected font as the
                                   temporary font with the
                                   current ID number (28).
     Ec%0B                         Enters HP-GL/2 mode.
     IN;                           Initializes HP-GL/2 mode.
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     PA1500,1500;                  Specifies absolute
                                   plotting and moves to
     DT#;                          Defines "#" as a label
                                   terminator (non-
     LBLaserJet Printers CR-LF#;   Prints "LaserJet
                                   Printers" in the
                                   currently selected font,
                                   which is the default
                                   Stick font, followed by a
                                   Carriage Return and Line
                                   Feed (CR-LF).
     AD4,18;FN28;SA;               Uses the AD command to
                                   designate an 18-point
                                   font from within HP-GL/2
                                   mode; selects the PCL
                                   font with font ID number
                                   28 as the secondary font;
                                   selects the font.
     LBLaserJet Printers#;         Prints "LaserJet
                                   Printers" in the newly
                                   selected font.
     Ec%0A                         Enters PCL mode.
     EcE                           Sends a reset to end the
                                   job and eject the page.

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

file: /Techref/language/pcl/lj2051.asc, 3KB, , updated: 1993/11/15 17:24, local time: 2024/6/12 11:38,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> language pcl lj2051</A>

Did you find what you needed?


Welcome to!

Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.

Welcome to!