please dont rip this site

Language Pcl LJ2050.ASC


     The Select Primary Font command ( FI ), allows any
     accessible font that has been assigned a font ID number
     to be selected as the primary (standard) font. For more
     information see the PCL 5 Printer Language Technical
     Reference Manual. The syntax for this command is as
     FI font-ID;
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     EcE                           Resets the printer.
     Ec*c15D                       Specifies a font ID
                                   number of 15.
     Ec(s1p18v0s3b4148T            Selects an 18-point
                                   Universe Bold font as the
                                   primary font.
     Ec*c6F                        Assigns the font just
                                   defined as the temporary
                                   font with ID number (15).
     Ec%0B                         Enters HP-GL/2 mode.
     IN;                           Initializes HP-GL/2 mode.
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     PA1500,1500;                  Specifies absolute
                                   plotting and moves to
     DT#;                          Defines "#" as a label
                                   terminator (non-
     LBLaserJet Printers CR-LF#;   Prints "LaserJet
                                   Printers" in the
                                   currently selected font,
                                   which is the default
                                   Stick font. Then, a
                                   Carriage Return and Line
                                   Feed (CR-LF).
     SD4,18;FI15;SS;               Uses the SD command to
                                   designate an 18-point
                                   font from within HP-GL/2
                                   mode; selects the PCL
                                   font with font ID number
                                   15 as the primary font;
                                   selects the primary font
                                   for printing.
     LBLaserJet Printers#;         Prints "LaserJet
                                   Printers" in the newly
                                   selected font.
     Ec%0A                         Enters PCL mode.
     EcE                           Sends a reset to end the
                                   job and eject the page.

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

file: /Techref/language/pcl/lj2050.asc, 3KB, , updated: 1993/11/15 17:24, local time: 2024/6/12 11:38,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> language pcl lj2050</A>

Did you find what you needed?


Welcome to!

Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.

Welcome to!