please dont rip this site

Language Pcl LJ2014.ASC

USING  THE CHARACTER PLOT ( CP ) COMMAND

     
     The Character Plot ( CP ) command specifies the number
     of spaces and lines from the current pen location that
     characters will be plotted. For more information see
     the PCL 5 Printer Language Technical Reference Manual.
     The syntax for this command is as follows:
     
     CP spaces,lines; or CP;

PARAMETERS:
     
     Spaces                        Specifies the number of
                                   spaces the pen moves
                                   relative to the current
                                   pen location.  The space
                                   width is uniquely defined
                                   for each font.
     
     Lines                         Specifies the number of
                                   lines the pen moves
                                   relative to the current
                                   pen location. The Line
                                   Feed distance is uniquely
                                   defined for each font.
     

PROGRAM:
     
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     
     
     
     
     EcE                           Resets the printer.
     
     Ec%0B                         Enters HP-GL/2 mode.
     
     IN;                           Initializes HP-GL/2 mode.
     
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     
     PA5000,2500;PD1500,2500;PU;   Specifies absolute
                                   plotting and moves to
                                   (5000,2500); puts the pen
                                   down to draw a line to
                                   (1500,2500); puts the pen
                                   up.
     
     CP5,.35;                      Moves the pen 5 spaces to
                                   the right and .35 lines
                                   up so the label is placed
                                   just above the line.
     
     DT$,1;                        Defines the label
                                   terminator ($) and
                                   specifies that it does
                                   not print with the "1"
                                   parameter.
     
     SD1,21,2,1,4,14,5,0,6,3,7,
     4148;SS;                      Specifies a 14 point
                                   Universe Bold font with
                                   the Standard Font
                                   Definition ( SD )
                                   command; selects it for
                                   printing with the Select
                                   Standard font ( SS )
                                   command.
     
     LBABOVE THE LINE$;            Prints the first line of
                                   text.
     
     PA2500,2500;WG20,0,360;       Moves the pen to
                                   (2500,2500) and draws a
                                   dot marking the new
                                   carriage return point
                                   (360 degrees black-filled
                                   wedge with a diameter of
                                   20 plotter units (plu)).
     
     CP0,-.95;LBBELOW THE
     LINE CR-LF WITH A NEAT$;      Prints the second line of
                                   text. The CR-LF stands
                                   for a Carriage Return-
                                   Line Feed, and is
                                   produced in DOS EDIT by
                                   pressing the ENTER key.
     
     CP;LBMARGIN$;                 Prints the fourth line.
                                   Notice how the CP command
                                   without parameters
                                   functions as a CR-LF.
     
     Ec%0A                         Enters the PCL mode.
     
     EcE                           Sends a reset to end  the
                                   job and eject the page.



            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.





file: /Techref/language/pcl/lj2014.asc, 4KB, , updated: 1993/11/15 16:22, local time: 2024/11/3 08:30,
TOP NEW HELP FIND: 
44.192.67.10:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.sxlist.com/techref/language/pcl/lj2014.asc"> language pcl lj2014</A>

Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to www.sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .