please dont rip this site

Language Pcl LJ1905.ASC


     The Edge Polygon ( EP ) command outlines any polygon
     that is currently in the polygon buffer. This includes
     wedges and rectangles defined using the EA , ER , EW ,
     RA , RR , and WG commands. EP accesses the data in the
     polygon buffer, but does not clear the buffer or change
     the data in any way.  For more information see the PCL
     5 Printer Language Technical Reference Manual.
          NOTE:  The last polygon drawn is stored
                 in the polygon buffer. This is
                 where EP finds the information
                 it needs to edge a polygon.
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     EcE                           Resets the printer.
     Ec%0B                         Enters HP-GL/2 mode.
     IN;                           Initializes HP-GL/2 mode.
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     PA2000,10;                    Selects absolute plotting
                                   mode and moves the pen to
     PM0;PD10,2000,10,10,2000,10;PM1;   Enters polygon mode,
                                   stores a pen down
                                   command, stores points
                                   (10,2000), (10,10), and
                                   (2000,10), then closes
                                   the polygon.
     PU610,610;CI500;PM2;          While still in polygon
                                   mode, lifts the pen and
                                   moves to (610,610). Draws
                                   a circle with a diameter
                                   of 500 plu, then closes
                                   the current subpolygon
                                   and exits polygon mode.
     EP;                           Outlines the polygon that
                                   was just stored in the
     Ec%0A                         Enters the PCL mode.
     EcE                           Sends a reset to end the
                                   job and eject the page.
            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

file: /Techref/language/pcl/lj1905.asc, 2KB, , updated: 1993/11/15 17:17, local time: 2024/6/12 12:19,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> language pcl lj1905</A>

Did you find what you needed?


Welcome to!

Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.

Welcome to!