DRAWING BEZIER CURVES The Bezier Absolute ( BZ ) and Bezier Relative ( BR ) commands use your current pen position as the first control point in the bezier curve. You specify the second, third and fourth control points. For more information see the PCL 5 Printer Language Technical Reference Manual. The following example shows a simple command sequence using BZ ( Bezier Absolute ) to draw a Bezier Curve in the shape of a sine wave. Note: The Bezier command is not supported on printers prior to the LaserJet 4 printer. LEGEND: Ec = [Ctrl] [P] Esc] in DOS EDIT EcE Resets the printer. Ec%0B Enters HP-GL/2 mode. IN; Initializes HP-GL/2. SP1; Selects pen number 1 (black). The SP command must be used to enable printing. PA1000,5000;PD; Specifies absolute plotting and moves to position (1000,5000) then puts the pen down. BZ2000,8000,4000,2000,5000,5000; Draws a bezier curve with (1000,5000) as the starting point (first control point). Specifies (2000,8000), (4000,2000), and (5000,5000) as the second, third and fourth control points. Ec%0A Enters PCL mode. EcE Sends a reset to end the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1902.asc, 2KB, , updated: 1993/11/15 16:16, local time: 2018/12/19 06:14,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/language/pcl/lj1902.asc"> language pcl lj1902</A>
|Did you find what you needed?|
Welcome to sxlist.com!
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!