please dont rip this site

Language Pcl LJ1886.ASC


     The Line Type command specifies a line pattern to be
     used when drawing lines. You can specify the line type,
     pattern length and the mode. The line type specifies a
     particular pattern, the pattern length specifies the
     length of one complete line pattern, and mode specifies
     how the values of the pattern length parameter are
     interpreted.  For more information see the PCL 5
     Printer Language Technical Reference Manual.
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT
     EcE                           Resets the printer.
     Ec%0B                         Enters HP-GL/2 mode.
     IN;                           Initializes HP-GL/2 mode.
     SP1;                          Selects pen number 1
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     SC-75,75,-75,75,1;            Sets up user scaling with
                                   (-75,-75) as P1 and
                                   (75.75) as P2; the "1"
                                   parameter specifies
                                   isotropic scaling.
     PA0,0;                        Specifies absolute
                                   plotting and moves to
                                   user-unit location (0,0).
     LT;CI5;                       Specifies a default line
                                   type (solid) and draws a
                                   circle with a radius of 5
     LT0;CI-12;                    Selects line type 0
                                   (dotted) and draws a
                                   circle with a radius of
                                   12 user-units (the -sign
                                   indicates starting at the
                                   180 degree point).
     LT1;CI19;LT2;CI-26;           Selects line type 1, and
                                   draws a circle with a
                                   radius of 19 user-units.
                                   then selects line type 2
                                   and draws a circle with a
                                   radius of 26 user-units.
     LT3;CI33;LT4;CI-40;           Selects line type 3,
                                   draws a circle with a
                                   radius of 33 user-units,
                                   then selects line type 4
                                   and draws a circle with a
                                   radius of 40 user-units.
     LT5;CI47;LT6;CI54;            Draws the outer two
                                   circles; the first with
                                   line type of 5 and radius
                                   of 47 user-units; the
                                   second with line type of
                                   6 and a radius of 54 user-
     Ec%0A                         Enters PCL mode.
     EcE                           Sends a reset to end the
                                   job and eject the page.
            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

file: /Techref/language/pcl/lj1886.asc, 3KB, , updated: 1993/11/15 17:14, local time: 2024/6/12 10:42,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> language pcl lj1886</A>

Did you find what you needed?


Welcome to!

Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.

Welcome to!