please dont rip this site

Language Pcl LJ1878

USING  EDGE RECTANGLE ABSOLUTE ( EA ) TO DRAW RECTANGLES

     
     The Edge Rectangle Absolute ( EA ) command defines and
     outlines a rectangle using absolute coordinates using
     the current pen location and a point you specify as the
     two opposite corners of a rectangle.  For more
     information see the PCL 5 Printer Language Technical
     Reference Manual.
     
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     
     
     
     EcE                           Resets the printer.
     
     Ec%0B                         Enters HP-GL/2 mode.
     
     IN;                           Initializes HP-GL/2 mode.
     
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     
     SC0,150,0,150,1;              Sets up user scaling,
                                   with P1 being (0,0) user-
                                   units, (as opposed to
                                   plotter units), and P2
                                   being (150,150) user-
                                   units. (The 1 on the end
                                   specifies isotropic
                                   scaling, or that the
                                   units on the X and Y axis
                                   are the same size).
     
     PA75,105;EA115,130            Selects absolute plotting
                                   mode and moves the pen to
                                   (75,105). Using the EA
                                   command will outline the
                                   shape of a rectangle that
                                   begins at (75,105) and
                                   has an upper right corner
                                   of (115,130) user-units.
     
     PA95,105;PD95,95;             Draws a line form
                                   (95,105) to (95,95).
     
     PD65,95,65,90;                Draws a line from the
                                   current pen location
                                   (95,95) to (65,95), and
                                   another line from there
                                   to (65,90).
     
     PU45,90;EA85,65;              Lifts the pen and moves
                                   to (45,90), then draws
                                   the outline of a
                                   rectangle with an upper
                                   left corner of (45,90)
                                   and a lower right corner
                                   of (85,65).
     
     PU95,95;PD125,95,125,90;      Lifts the pen and moves
                                   to (95,95), lowers the
                                   pen and draws a line to
                                   (125,95), then to
                                   (125,90).
     
     PU145,90;EA105,65;            Lifts the pen and moves
                                   it to (145,90). Draws the
                                   outline of a rectangle,
                                   with the upper right
                                   corner at (145,90) and
                                   the lower left corner at
                                   (105,65).
     
     Ec%0A                         Enters the PCL mode.
     
     EcE                           Sends a reset to end the
                                   job and eject the page.
     
     
     
            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.
     


file: /Techref/language/pcl/lj1878.asc, 3KB, , updated: 1993/11/15 17:12, local time: 2018/9/20 15:48,
TOP NEW HELP FIND: 
54.80.96.153:LOG IN

 ©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.sxlist.com/techref/language/pcl/lj1878.asc"> language pcl lj1878</A>

Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to www.sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .