HP-GL TO HP-GL/2 COMMAND CHANGES LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT There are some commands of the HP-GL language that are not available in the HP-GL/2 language for LaserJets, because of the differences between the LaserJet printers, and HP Plotters. XT AND YT ( X TICK AND Y TICK ) This command allows for automatic x- and y-axis tick mark printing. It is not available in HP-GL/2 as implemented on the LaserJet printers. RP ( REPLOT ) This command allows a plotter to recreate the plot image without sending new data to the plotter, (or printer). The only way to produce multiple copies on the LaserJet running in HP-GL/2 mode is to send a PCL copies command before entering HP-GL/2 mode, then at the end of the plot file an exit HP-GL/2 command is required. PG ( PAGE ADVANCE ) This is an eject plot command. It has been disabled in the LaserJets to allow mixing of HP-GL/2 and PCL commands on the same page. The only way to eject a page is from PCL mode. The following commands will cause a conditional (if buffer holds data) page eject: Printer Reset Command EcE Page Size Command Ec&l#A Paper Source Command Ec&l#H Page Length Command Ec&l#P Orientation Command Ec&l#O The printer will also unconditionally eject the page if a form feed control code character is sent (Decimal value 012 in ASCII). A form feed can also be invoked on the front panel of the printer if there is data in the buffer. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1774.asc, 1KB, , updated: 2001/11/5 12:39, local time: 2018/1/20 07:30,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/language/pcl/lj1774.asc"> language pcl lj1774</A>
|Did you find what you needed?|
Welcome to sxlist.com!
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!