PCL5 CURSOR POSITIONING BY DOTSLEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT DEFINITION Note the difference in using row and column cursor positioning verses using dot cursor positioning. When cursor positioning by rows, the cursor moves to the baseline of the first row; when cursor positioning by dots, the cursor moves to the absolute point 0,0. CURSOR POSITIONING BY DOTS EcE Printer Reset Ec&l12E Sets a top margin of 12 lines. Ec&a15L Sets a left margin of 15 columns. Ec*p0y0X Cursor position to dot position zero,zero. Ec(10U Selects the PC-8 symbol set. Ec(s1p24v0s0b4101T Selects a proportional, 24 point, upright, medium, CG Times font. This Is A Test Will print "This Is A Test" EcE Printer Reset Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1623.htm, 1KB, , updated: 2005/4/29 12:00, local time: 2019/9/15 23:18,
|©2019 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/language/pcl/lj1623.htm"> language pcl lj1623</A>
|Did you find what you needed?|
Welcome to sxlist.com!
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!