a popular Linux based CNC control software:
Justin McLeod says: "I have the linistepper working with EMC, I have attached a screen shot of the configuration page. All the values in the screen shot have a safety factor of 500ns. One note on the max step rate value, a large factor in that is the latency test result, due to real time, my latency number is really low, so the max frequency could be much lower for some people."
|file: /Techref/io/stepper/linistep/EMC.htm, 3KB, , updated: 2015/1/16 16:11, local time: 2022/7/1 22:53,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/io/stepper/linistep/EMC.htm"> Linistepper with EMC</A>
|Did you find what you needed?|
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!