The biggest problem I see with wind power is that A) the wind is way up there in the air and gets (much) slower as you approach the ground B) anything that you lift way up into that good wind can fall / fly a long way and C) if it is heavy, it's going to do a lot of damage when it hits the ground.
So I'm more interested in windmills that use light-weight cloth type materials. See my low and slow sail based mill
I've been turning over in my mind a sort of dirigible with sail "wings" that would be turned about its axis by the sails and use a mooring line looped over a pulley at the nose. It would pull up on one side of the line and let out the other. On the ground, the pull up side of the line would turn a pulley on a generator. The "let out" side of the mooring line would run over a pulley some distance from the generator side which would be spring loaded to maintain tension on the loop.
The killer on that design is how you keep the thing from turning in the air and tangling the lines, while at the same time allowing it to turn into the wind.
|file: /Techref/idea/flymill.htm, 2KB, , updated: 2010/4/23 11:54, local time: 2018/6/20 21:52,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.sxlist.com/techref/idea/flymill.htm"> Lightweight, safe, high speed, high flying windmill idea</A>
|Did you find what you needed?|
Welcome to sxlist.com!
& kind contributors
just like you!
Please don't rip/copy
Copies of the site on CD
are available at minimal cost.
Welcome to www.sxlist.com!