please dont rip this site

Scenix Lib IO OSI3 Tcpip Documentation Rfcs RFC768.TXT

 






       RFC 768                                                        J. Postel
                                                                            ISI
                                                                 28 August 1980



                                User Datagram Protocol
                                ----------------------

       Introduction
       ------------

       This User Datagram  Protocol  (UDP)  is  defined  to  make  available  a
       datagram   mode  of  packet-switched   computer   communication  in  the
       environment  of  an  interconnected  set  of  computer  networks.   This
       protocol  assumes  that the Internet  Protocol  (IP)  [1] is used as the
       underlying protocol.

       This protocol  provides  a procedure  for application  programs  to send
       messages  to other programs  with a minimum  of protocol mechanism.  The
       protocol  is transaction oriented, and delivery and duplicate protection
       are not guaranteed.  Applications requiring ordered reliable delivery of
       streams of data should use the Transmission Control Protocol (TCP) [2].

       Format
       ------

                                           
                         0      7 8     15 16    23 24    31  
                        +--------+--------+--------+--------+ 
                        |     Source      |   Destination   | 
                        |      Port       |      Port       | 
                        +--------+--------+--------+--------+ 
                        |                 |                 | 
                        |     Length      |    Checksum     | 
                        +--------+--------+--------+--------+ 
                        |                                     
                        |          data octets ...            
                        +---------------- ...                 

                             User Datagram Header Format

       Fields
       ------

       Source Port is an optional field, when meaningful, it indicates the port
       of the sending  process,  and may be assumed  to be the port  to which a
       reply should  be addressed  in the absence of any other information.  If
       not used, a value of zero is inserted.





       Postel                                                          [page 1]







                                                                    28 Aug 1980
       User Datagram Protocol                                           RFC 768
       Fields



       Destination  Port has a meaning  within  the  context  of  a  particular
       internet destination address.

       Length  is the length  in octets  of this user datagram  including  this
       header  and the data.   (This  means  the minimum value of the length is
       eight.)

       Checksum is the 16-bit one's complement of the one's complement sum of a
       pseudo header of information from the IP header, the UDP header, and the
       data,  padded  with zero octets  at the end (if  necessary)  to  make  a
       multiple of two octets.

       The pseudo  header  conceptually prefixed to the UDP header contains the
       source  address,  the destination  address,  the protocol,  and the  UDP
       length.   This information gives protection against misrouted datagrams.
       This checksum procedure is the same as is used in TCP.

                         0      7 8     15 16    23 24    31 
                        +--------+--------+--------+--------+
                        |          source address           |
                        +--------+--------+--------+--------+
                        |        destination address        |
                        +--------+--------+--------+--------+
                        |  zero  |protocol|   UDP length    |
                        +--------+--------+--------+--------+

       If the computed  checksum  is zero,  it is transmitted  as all ones (the
       equivalent  in one's complement  arithmetic).   An all zero  transmitted
       checksum  value means that the transmitter  generated  no checksum  (for
       debugging or for higher level protocols that don't care).

       User Interface
       --------------

       A user interface should allow

         the creation of new receive ports,

         receive  operations  on the receive  ports that return the data octets
         and an indication of source port and source address,

         and an operation  that allows  a datagram  to be sent,  specifying the
         data, source and destination ports and addresses to be sent.






       [page 2]                                                          Postel







       28 Aug 1980
       RFC 768                                           User Datagram Protocol
                                                                   IP Interface



       IP Interface
       -------------

       The UDP module  must be able to determine  the  source  and  destination
       internet addresses and the protocol field from the internet header.  One
       possible  UDP/IP  interface  would return  the whole  internet  datagram
       including all of the internet header in response to a receive operation.
       Such an interface  would  also allow  the UDP to pass  a  full  internet
       datagram  complete  with header  to the IP to send.  The IP would verify
       certain fields for consistency and compute the internet header checksum.

       Protocol Application
       --------------------

       The major uses of this protocol is the Internet Name Server [3], and the
       Trivial File Transfer [4].

       Protocol Number
       ---------------

       This is protocol  17 (21 octal)  when used  in  the  Internet  Protocol.
       Other protocol numbers are listed in [5].

       References
       ----------

       [1]     Postel,   J.,   "Internet  Protocol,"  RFC 760,  USC/Information
               Sciences Institute, January 1980.

       [2]     Postel,    J.,   "Transmission   Control   Protocol,"   RFC 761,
               USC/Information Sciences Institute, January 1980.

       [3]     Postel,  J.,  "Internet  Name Server,"  USC/Information Sciences
               Institute, IEN 116, August 1979.

       [4]     Sollins,  K.,  "The TFTP Protocol,"  Massachusetts  Institute of
               Technology, IEN 133, January 1980.

       [5]     Postel,   J.,   "Assigned   Numbers,"  USC/Information  Sciences
               Institute, RFC 762, January 1980.









       Postel                                                          [page 3]




file: /Techref/scenix/lib/io/osi3/tcpip/Documentation/RFCs/rfc768.txt, 6KB, , updated: 2005/8/19 18:11, local time: 2024/3/19 03:34,
TOP NEW HELP FIND: 
34.228.7.237:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.sxlist.com/Techref/scenix/lib/io/osi3/tcpip/Documentation/RFCs/rfc768.txt"> scenix lib io osi3 tcpip Documentation RFCs rfc768</A>

Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to www.sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .