please dont rip this site

Kenneth C. Fenney says:

I did a fair bit of work on this chip for a client just a few months ago... you are right to clear the overrun condition by clearing and then setting CREN which has the effect of resetting the receive logic-otherwise the hardware won't shift anymore bytes out of the receive shift register if OERR is set.

However, this bit has no effect on the framing error flag which is just a pronouncement that a stop bit wasn't detected when it should have been. This flag is set/cleared every time you read the receive register (RCREG), and it has no deleterious effect on the UART's behaviour - unlike the OERR bit which gums up the works until you reset it. It does mean that you should *save* the framing status immediately after a read, especially if you're running on rda interrupts and may want perform some out-of-band ack/nack or re-send logic.

As far as I can tell, this is the same for all the other PICs with onboard UARTs (well at least the 65, 73A, 74A, and 77) that I've worked with.

M. Adam Davis says:

Thomas C. Sefranek's 16C73 USART Serial Port Gotcha List and Source


file: /Techref/microchip/16xuarts.htm, 2KB, , updated: 2000/4/10 11:57, local time: 2024/3/28 10:16,
TOP NEW HELP FIND: 
54.224.124.217:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.sxlist.com/TECHREF/microchip/16xuarts.htm"> microchip 16xuarts</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to www.sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .